I loved wearing Zoya Lola so much, I glitzed it up a bit and wore it all weekend. It had been several weeks since I’d used Sally Hansen Glitz Gal and I wanted to use it again.
I’ve been seeing accent nails lately that aren’t the usual ring finger and/or thumb. I decided to give it a try. So I put Glitz Gal over Lola on my index and middle fingers. I’m undecided about how I feel about it. As a whole five finger look, it’s okay. The majority of the time I feel like I just see my four fingers and it just looks like a half and half mani.
While I love these two polishes together, I’m not sure I like this arrangement. What do you think ladies?
I was eating my usual salad for lunch the other day and, there it was, the inspiration for my mani. Avocado nails. Silly, I know and a bit of a stretch of the imagination. Avocado is one of my most favoritest things in the world! Om, nom, nom.
I used Sinful Colors Nirvana for the pit, Orly Green Apple for the meat and a mix of China Glaze Starboard and Sally Hansen Black Out for the skin.
This was seriously so much more difficult than you would have imagined. Stamping your finger print on paper with ink is child’s play. Getting a print where just the ridges showed up, not so easy. I did try this with ink. It looked okay, but you couldn’t put a top coat over it. The top coat would basically eat the ink and it would disappear. I knew that was too easy. I read where someone simply painted polish on their finger, stamped it on a paper until they saw a good print, them stamped it on their nail. I tried that and still, it wasn’t what I was looking for. Here’s the ridiculous explanation of how I achieved this look. Obviously you need to choose a base color first. I went with Orly Green Apple. I love this bright green color, but it stains the crud out of my nails. Let this coat dry. Now the ridiculousness starts. I hope I can make this make sense to all of you. Get a non-acetone nail polish remover and wet a cotton ball. Swipe it over your starting nail a couple times to make it sticky or soften it, I guess. That probably doesn’t make any sense. You want the nail polish remover to just eat at the very top of the polish, which will leave it sticky to the touch.
Now on the finger or thumb that is going to do the stamping; dampen it with the same cotton ball. Damp, not wet. Take your stamping polish and brush it over the dampened part of your finger. Not too thick, not too thin. Try to get even coverage. Brush back and forth until any thick spots are spread out. Now here’s the crazy variable; blow on the polish for 25ish seconds. You want to almost dry it. About 25 seconds was the magic number for me. Your lung capacity may dictate a different number for you. Now firmly press your finger to the nail that you made tacky earlier. I started on one edge and slowly rolled my finger so I could cover my entire nail. If your nail was sticky enough and your stamping polish was just the right amount of dryness, your finger should be sticking to your nail nicely as you roll it. Clear as mud?
If your stamping polish was too wet you ended up with more than just the ridges stamped on your nail. If it was too dry, you likely ended up with spotty ridges stamped on your nail. If either of these is the case, this is where you go back to your cotton ball and clean off only the stamping polish. This is why it’s important for you to use non-acetone remover; it will easily remove the stamp, but will take a bit more elbow grease to take off your base color.
Now if you ask me, it’s important to top coat this with Seche Vite and only Seche Vite. I’ve tried many top coats and so far Seche Vite is the only one that doesn’t smear my nail art. This print is made up of such intricate details that it will look totally muddy if you use a top coat that smears. Go ahead and try whatever top coat you want, but be forewarned, it might ruin all your hard work. Please let me know if you have any questions. I know this was the most precise tutorial you’ve ever read, right?
Last week I guest posted on See Sarah Swatch with this awesome chevron mani. I promised a tutorial so here you go. *Please excuse my dry skin. I took off one mani and started into the next without moisturizing between.
I started with a white base of Sinful Colors Snow Me White. The yellow I used is Sinful Colors Unicorn and it takes several coats to get good coverage. It’s tends to be really streaky if you don’t do 4+ coats so to remedy that I put it over white. One good coat of Unicorn over Snow Me White was pretty good.
I used some pinking shears to cut lots of small, little strips of scotch tape. You have to make sure you line your zig zags up when you’re cutting. Wait until your polish is totally dry before you put tape on it. If you want to use a fast drying top coat to speed up the process, go for it. Stick the strip to your hand a few times to get most of the sticky off the tape before you stick it to your nail. If you use full strength sticky tape, it will likely pull your polish off. Line the strips up to your liking. I used tweezers to help with this since the strips were so small. Press them down firmly and use an orange stick to get into the sides of your nails.
Apply one coat of your second color, blow on your nail for a few seconds and apply another coat to get full coverage. While your polish is still wet, carefully take your tape off. Put on your top coat and you’re done!
This is an example of what will happen if your base color is not completely dry before you start sticking tape to it. Beautiful, right?
I love this chevron mani. I guess I will have to get myself a pair of pinking shears so I don’t have to borrow them from my neighbor the the next time I want to try this. The grey polish is Sally Hansen Wet Concrete. Let me know if you have any questions.
Sally Hansen Antiquated Gold crackle: I’ve used crackles in a couple other brands and this was the smoothest yet. It’s definitely not a yellow gold. It’s really pretty. I don’t have that much to say about it.